Reasons Your Water Heater Isn't Functioning
Reasons Your Water Heater Isn't Functioning
Blog Article
Just about everyone is bound to have their personal assumption on the subject of No Hot Water — Water Heater Repair.
Many modern houses take advantage of an electrical water heater for their heating unit, as a result of its ease and ease of use. Nevertheless, similar to any other electric appliances, issues may develop with its use, unexpectedly. It can be truly discouraging to get up to a cool shower as opposed to a hot one or having your bath with water that isn't hot sufficient or perhaps also warm. Whatever the case might be, hot water heater problems can be rather nerve-racking. The good news is, we have actually made a checklist of feasible solutions to your hot water heater problems. There are a number of elements that could cause much of these troubles, it could be a problem with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you shut off the primary power supply for safety and security. Whatever the trouble is, getting it fixed ought to not present way too much of a concern if you adhere to these actions:
Check Your Power Supply:
As basic as this may seem, it is extremely needed. Without ample power, your hot water heater will certainly not work. So the first thing to do when your water unexpectedly retires is to validate that it isn't a power trouble. Examine if the fuse is burnt out or the breaker tripped. If the breaker is the concern, merely transform it on and off again. Replace any type of damaged or damaged fuse. Examine the appliance with power after these changes to see if it's now functioning.
Inspect the Burner in the Hot Water Heater:
If it's not a power trouble, after that try having a look at your heating element if it is still functioning. Check each of your burner to ensure the trouble isn't with any one of them. If any one of them is faulty, replace that part and then check whether the hot water is back on.
Check Your Thermostat:
If your water heater still isn't working or the water coming out isn't hot enough, you may need to check the temperature settings on your upper thermostat. Ensure the circuit breaker is switched off before doing anything. Open the access panel and press the red button for temperature level reset over the thermostat. This must assist heat up the water. Turn the breaker back on and also inspect if the issue has been settled.
Call An Expert:
If after replacing all faulty components and also resetting your temperature, the water heater still isn't functioning, you might need to contact a specialist plumber for a specialist viewpoint. The trouble with your heating unit could be that the hot and cold taps have actually been changed or it may be undersized for the amount of hot water required in your house. Whatever the situation may be, a professional plumber would certainly aid fix the issue.
Conclusion
Hot water heater issues are not always major. Many of them result from small issues like a blown fuse or damaged burner. Replacing the faulty components must do the trick. However, if you are still incapable to resolve the problem, give a call to your local plumber to find to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As a person who reads about No Hot Water — Water Heater Repair, I think sharing that piece of content was smart. Are you aware of another individual who is excited by the topic? Feel free to promote it. We recognize the value of reading our article about How to Troubleshoot and Repair an Electric Water Heater.
Free Estimate
Report this page